Milwaukee PH600 Digital pH Pen Milwaukee PH600 Digital pH Pen Milwaukee PH600 Digital pH Pen

Milwaukee PH600 Digital pH Pen

enkelt og rimelig pH meter

Varenr:103975
PH600 er et enkelt og rimelig pH meter fra Milwaukee, for måling av pH i væske.
pH måleren leser pH fra 0,0 til 14,0 pH med en nøyaktighet på +/- 0,1 pH.

Batterier, instruksjon og verktøy for kalibrering er inkludert.
499,-
-+
8på lager
BeskrivelseTeknisk infoTilbehørAlternativerSupportKundeanmeldelser
Beskrivelse

PH600 er et enkelt og rimelig pH meter fra Milwaukee, for måling av pH i væske.
pH måleren leser pH fra 0,0 til 14,0 pH med en nøyaktighet på +/- 0,1 pH.

Batterier er inkludert.

 

DIGITAL. SIMPLE. COMPACT.


Over 200,000 people have relied on the Milwaukee PH600 compact pH pen to move from difficult to use and interpret pH strips to digital testing.

 

SUMMARY


The Milwaukee PH600 compact digital pen is specifically designed to help maintain pools, water conditioning, classrooms or labs. Keeping the proper pH improves results of chlorine in a pool.  It also helps in understanding the quality of a water conditioning system.

Use digital accuracy to keep pH in your target range for better results.

 

WHAT PEOPLE ARE SAYING


"Accurate results and calibrated right out of the box."

"Must have for any aquarium owner."

"Good value. Easy to use. Consistent."

 

DESIGN FEATURES


Fast, accurate results with digital LCD readout.
Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize.
Simple 1 point calibration with an easy-to-use trimmer located on the back of the tester to protect from accidental splashes.
Cap to protect the pH sensor and keep it wet when stored upright.
Low power demand for extended battery life (batteries included).
Comes in a hard carrying case complete with calibration screwdriver and instructions.

USE AND CARE


All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH Pen will give you fast, accurate results for longer.

Here are our top four tips.

 

  1. Always store upright with the cap full of buffer or storage solution MA9015 not water.
  2. Clean your Pen regularly by soaking in cleaning solution MA9016.
  3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.
  4. Gently stir the Pen in the sample for a faster result.

 

SPECIFICATIONS


pH range: 0.0 to 14.0 pH
Resolution: 0.1 pH
Accuracy: +/- 0.1 pH
Typical EMC Deviation: +/- 0.2 pH
Calibration: Manual, 1 Point
Environment: 32°F to 122°F (0 to 50°C) 95% RH
Approximate dimensions: 6 x 1.2 x 0.95 inches
Weight: 3 ounce
Battery Type: 3 x 1.5 V Alkaline (included)
Battery Life: 700 hours
Warranty: 2 years

Teknisk info


Tilbehør
Alternativer
Support
Kundeanmeldelser